NewOrUsed

Brand

Modèle

Year of production

Motorization

Motor hours

Force vérins latéreaux (T)

Weight (T)

Grue

Force vérins pousseur 1 (T)

Shears Power US

Metric

Length (ft or inch)

Shears Power EU

Section (mm x mm)

Force vérins latéreaux (T(US))

Force écraseur (T)

Availability

Force vérins pousseur 2 (T)

Section (ft or inch)

Force écraseur (T(US))

Force vérins pousseur 1 (T(US))

Force vérins pousseur 2 (T(US))

Force de coupe (T(US))

Power Electric

Force de coupe (T)

Benne

Weight (Lbs)

Length (mm)

Cabine

Power Thermal

Shears type

Radiocommande

Technical data baler:
Manufacturer BOA
Type 2100 75 (8) PR SD
Year of manufacture 1995
Operating hours 9,163 hours, as of June 23
Pressing force main press 90 t
Operating pressure 280 bar
Dimensions of feed chute 1,620 x 1,080 mm
Filling volume / pressing cycle 2.4 m³
Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm
Drive power 2 x 37 kW
Connected load 92 kW
Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding
Throughput rates for quality:
B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale
Foil approx. 10 t/hour, bale weight up to 800 kg/bale
Hydraulic oil tank capacity 1,500 L
PLC control system Siemens  SIMATIC S7-1500, renewal in 2020
Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h)
Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h)
Machine weight press approx. 30 t
Noise level <90 dB (A)
 
Special equipment:
REFUSE ram, with which, for example, residual waste, wood, straw, hay and textiles can also be compacted.
Hardox press floor
 
Use as a revision press 1995 to 2020:
The baler was originally in operation in an incineration plant as a so-called revision baler for only 6 - 8 weeks per year. Whenever the incinerator was undergoing inspection (repair and maintenance), the material to be incinerated was pressed into bales with the BOA baler, then stretched with foil and stored outdoors until winter. The press was only in operation for these maintenance periods, hence the extremely low operating hours.
 
The following repairs and partial overhauls were carried out:
2018: All hydraulic cylinders were dismantled, disassembled and the seal sets renewed, some of the cylinders were also overhauled.
2020: The old PLC control system was replaced with a completely new Siemens SIMATIC S7-1500 control system.
2023: The CPU of the control was renewed and in April 2023 the last maintenance was carried out on the press.
After the overhaul and renewed commissioning at a medium-sized waste disposal company for paper, cardboard and films, the press will now be replaced by a larger machine on 22.09.23 after a further approx. 3 years of use.
 
Scope of delivery:
Only the baler with chute is for sale. The conveyor belt is not included in the delivery and is not for sale.
 
Comments:
The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.

Baler BOA, type 2100 75 (8) PR SD, 90 t press force, with REFUSE ram, HARDOX floor, yoc 1995, with only 9,163 operating hours, drive power 2 x 37 kW

OBM Recycling Machinery BV

Aanvraag inspectie

Myscrapmachine.com

Over MyScrapMachine

Contact