Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW Motor Power: 4x90 kW Feeding Opening: 1.500x2.000 mm Capacity: 20 ton/h (Steel), 6 ton/h (Aluminium) Blade Width: 15 cm Machine Weight: 44 ton Dimensions: 4.400x6.000 mm -The shredding chamber walls are covered with HARDOX 500 material for long-term life-cycle and friction resistance. -The machine is fully automated by a PLC control. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. -Scrap material keeps getting shredded by the blades which are placed on the rotor and side walls until they become small enough to pass through the sieve. If the sieve is not in use, shredded materials will be the same size as the width of the blades. -Movement of the rotors is provided by a reductor which is driven by an electric motor. -The rotors move independently from each other. -The shredder can be loaded by a conveyor or a grab. -The rotors run in opposite directions when there is jamming between the blades, it keeps running in normal direction after the jamming is removed. The machine sounds an aural warning and stops if the jamming can not be removed. -The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. -Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.