Technical data Pulper for vacuum batch operation: Year of construction 2016 Operating hours approx. 3,500 hours Total volume pulper 40 m³ Working volume pulper approx. 28 m³ Stock consistency < 15 Material conveying speed from TKF 0.4 m/second Throughput rate up to 3.5 pulper batches per hour Drive power Pulper Hi-Torc drive 440 kW Max. Rotor speed 3,000rpm. Material types: Leached labels from breweries and mineral water bottling plants, wet-strength papers such as tissue production waste, security papers, etc., moisture content approx. 35 - 50%. Beverage carton and other film-coated papers, moisture content approx. 22% on average Kraft papers such as carrier bags, six-pack, sack papers without foil liner, ambient moisture content average 7% Corrugated cardboard waste and clean paper waste, ambient moisture average 7% Throughput calculation example in batch operation with leached labels, with 35% moisture content: Target paper input 4,200 kg x 100% + 35% residual moisture : 100% = 5,670 kg quantity of paper to be conveyed with 35% moisture content for one batch Calculation example for the required amount of filling water: Working quantity 28,000 kg - 5,670 kg material input = 22,330 kg pulper filling water Trough chain conveyor after dosing drum (material input): Type TKF2 2200 - 23150, pos. 100 Centre distance 23,150 mm 1st horizontal section 4,000 mm 2nd horizontal section 3,350 mm Elevating section 15,800 mm Useful width 2,200 mm Sidewall 800 mm Incline 60° Sheet thickness frame 4 mm Belt speed 0.4 m/second Drive motors 2 x 15 kW Chain type FV 140 Pusher height 250 mm Moving end pitch 250 mm Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.