OVERVIEW: Fines: Drum Frame with 200mm Screens Mid Product: Fully Welded Drums with 450mm Openings Oversize Up to 32” (800mm ), Output of up to 500 Tonnes per Hour. HOPPER AND FEEDER Feed hopper capacity - 16.5yd3 (12.6m3) Mechanism - Hydraulic variable speed drive via hydraulic cylinder Feeder - Reciprocating plate feeder fitted directly under feed hopper. Plate width & Speed - 3ft 1 inch (940 mm), 8 Strokes per minute. WEIGHT & WORKING DIMENSIONS Weight - 48 tons approximately Length - 68ft 10in (20.9 metres) Width - 24ft 10in (7.6 metres) Height - 16ft 5in (5 metres) TROMMEL DRUM Diameter & Length - Internal 5ft (1.5m), 20ft (5.5m) Incline angle - 5 degrees Fines - 200 mm Screens installed Mid Product - 450mm Fully Welded Drum POWER UNIT & CONTROLS This Unit is powered by CAT4.4 96 kW (128.7 HP) Diesel Engine Electronic Control System Digital Control Panel with Control Features and Diagnostics Fines Conveyor - 1200mm (3ft 11in) wide heavy duty belt, feeding to the rear of the machine. - Output height 12ft 8in - Single hub Hydraulic Drive Mid Product Conveyor - 1000mm (3ft 3in) wide heavy duty belt, feeding to the side of the machine. - Output height 11ft 4in - Single hub drive. Oversize Conveyor - 1200mm (3ft 11in) wide heavy duty belt, feeding to the front of the machine. - Output height 12ft 5in - Single hub Hydraulic Drive Second recycling drum included 1.5m 125mm opening and 4m 40mm openings