NewOrUsed

Brand

Modèle

Year of production

Motorization

Motor hours

Force vérins latéreaux (T)

Weight (T)

Grue

Force vérins pousseur 1 (T)

Shears Power US

Metric

Length (ft or inch)

Shears Power EU

Section (mm x mm)

Force vérins latéreaux (T(US))

Force écraseur (T)

Availability

Force vérins pousseur 2 (T)

Section (ft or inch)

Force écraseur (T(US))

Force vérins pousseur 1 (T(US))

Force vérins pousseur 2 (T(US))

Force de coupe (T(US))

Power Electric

Force de coupe (T)

Benne

Weight (Lbs)

Length (mm)

Cabine

Power Thermal

Shears type

Radiocommande

Technical data baler:
Manufacturer BOA Recycling Systems B.V.
Type Impress D225-165-D-5V/5H-1.6
Year of manufacture 2022
Operating hours 1,486 hours, as of June 2023
Pressing force main press 2,211 kN or 211 t
Specific pressing force 17.5 kg/cm²
Working pressure 280 bar
Press stroke main hydraulic cylinder 2,900 mm
Average cycle time 23 seconds
Dimensions of feed chute 1,620 x 972 mm
Volume of press chamber 4.4 m³
Bale dimensions 1,100 x 1,200 mm, length variable
Drive power 3 x 45 kW
Total connected load 250 kW, 500 A
Tying system 5-fold vertical, 5-fold horizontal, fully automatic
Throughput rates with a
bulk density of 30 kg/cbm up to 20 t/hour
Bulk density of 60 kg/cbm up to 33 t/hour
Bulk density of 100 kg/cbm up to 46 t/hour
Bulk density from 150 kg/cbm up to 56 t/hour
Bulk weight from 200 kg/cbm up to 69 t/hour
Bale weights up to 1300 kg, depending on material
Hydraulic oil tank capacity 2,700 L
PLC control (manufacturer, type) Siemens S7-1500
Operating panel (manufacturer, type) Siemens Multi Touch Panel
Machine weight press approx. 70 t
Noise level <85 dB(A)
Installation dimensions of baler with bale chute and feed hopper 16,901 x 5,400 x 7,780 mm (l x w x h)
Required hall floor space incl. maintenance areas around the machine 20,000 x 8,500 mm (l x w)
 
Special equipment:
Hardox floor panels
Oversized bale dimensions 1,100 x 1,200 mm, variable length
Separately switchable 5-fold horizontal binding, so that the bale can be pressed and tied with a 10-fold cross binding even the most expansive materials in a dimensionally stable way
Remote control with LED screen
Heating in the oil tank for winter operation
Ecoline version (particularly energy-saving)
Refu ram
Ixon modem connection for remote maintenance
 
Scope of delivery:
1 piece baler
1 piece chute
1 piece bale slider
20 pieces wire reel stands
8 pcs. wire draw frames, 4 pcs. with 2 wire deflectors, 4 pcs. with 3 wire deflectors
1 piece switch cabinet
1 piece machine documentation (operating instructions, CE declaration of conformity, electrical circuit diagrams, hydraulic circuit diagrams, installation drawings)
 
Comments:
The machine is currently still in operation and can be inspected with the use of material. An exchange of the press, possibly even with the associated conveyor technology, can still be negotiated in detail. The documentation (BA, CE, electrical/hydraulic circuit diagram) is completely available. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Baler Paal, type Impress D225-165-D-5V/5H-1.6, pressing force 21 t, yoc 2022, only 1,486 operating hours, drive power 3 x 45kW, 10-fold cross tying system

OBM Recycling Machinery BV

Inspection Request

Myscrapmachine.com

About

Contact