Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufacture 2015 Belt length 2,300 mm Width between the side parts 1.600 mm Belt width 1,200 mm Max. Load 1.500 kg Conveying speed 0.25 m/second Drive power 1.5 + 1.5 + 1, 5 + 2.2 + 30 kW Height of side panels 800 mm Blade lowering speed 70/40 mm/second Hydraulic pressure 160 bar Pneumatic pressure 6 bar Height of the system 5,700 mm Bale length dimensions min. 1,000 mm, max. 2,200 mm Bale width dimension min. 750 mm, max. 1,200 mm Bale height dimension min. 750 mm, max. 1,200 mm Material qualities provided OCC department stores' paper, mixed paper, punching waste, label waste, beverage cartons Wire diameter 3 - 4 mm Operating hours approx. 3,500 hours Throughput capacity approx. 50 bales/hour Total power consumption approx. 37 kW Control system Siemens S7-300 Operator panel Siemens HMI TPU1200 in 12". Wire reel for wire winding, pos. 4: Drive power 5,5 kW Pneumatic working pressure Condition of the baler The complete plant was used exclusively in trial operation for opening and de-wiring bales of pressed OCC paper and beverage cartons. After a short time, the project was discontinued and the system was no longer used. The conveyor technology and the bale opener and dewiring unit are really in a very good condition. As you can see from the pictures, there is almost no wear visible. The production line is ready for immediate use and available at short notice. The new price of the plant was 597.000,- €. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available in German language. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.